Marabu Printing Inks

Glass Ink GL

Satin gloss, fast curing 2-component ink for printing onto glass with very good dishwasher resistance. The resistances of the prints can be further increased by oven baking (140°C/30 min). Beyond the substrates glass and ceramics, GL provides outstanding adhesion also on many metals such as chromed parts as well as coated substrates.

Additional Information:

  • For indoor decoration prints
  • High resistances through oven drying
  • Dishwasher-resistant
  • Also suited for screen printing

Technical Data:

  • Composition: 2-component
  • Drying: fast
  • Degree of gloss: satin gloss
  • Resistance to: dishwasher cycles

Maralox LX

This modern 1-component ink system is ideally suited for varnished substrates, numerous plastics, as well as some metals. Thanks to its excellent printability, high opacity, and high gloss, Maralox LX is especially suited for the printing of lacquered miniature cars. Besides that, its very good ink transfer and adhesion properties give the possibility to use this 1-component ink for prints where up to today 2-component systems were necessarily to be used.

Additional Information:

  • ink system drying by oxidation
  • high gloss and high opacity
  • very good printability
  • excellent ink transfer
  • outstanding cliché opening
  • labelling without H&S symbols
  • very mild

Technical Data:

  • Composition: 1-component
  • Drying: by oxidation
  • Degree of gloss: high gloss
  • Resistance to: domestic cleaners

Maraprop PP

Satin gloss, quick-drying one-component ink with a very flexible ink film and good adhesion properties. Especially developed for untreated and pre-treated polypropylene materials. Untreated and pre-treated polypropylene, solid or expanded panel material, packaging materials, such as Priplak and Akylux, as well as injection-moulded parts in the field of printing on promotional items, marking, and in the field of medical applications.

Additional Information:

  • satin gloss
  • fast 1-component ink
  • very flexible

Technical Data:

  • Composition: 1-component
  • Drying: fast
  • Degree of gloss: satin gloss
  • Resistance to: bending

Tampagraph TPGR

Decisive criteria for the selection of the suitable printing ink are efficiency, a fast realisation time, and an easy handling. Tampagraph TPGR can be used for a very wide substrate range which is typical for the field of promotional goods, for example for polystyrene, ABS, SAN, polycarbonate, acrylics, rigid PVC and, varnished services. By adding hardener H1 or H2 Hardener, Tampagraph TPGR adheres excellently to many other substrates such as thinly anodized aluminium, or some thermosetting plastics.

Additional Information:

  • modern rheology
  • high-opaque, glossy basic shades
  • very broad substrate range
  • good resistance to alcohol
  • fast drying

Technical Data:

  • Composition: 1-component or 2-component
  • Drying: fast
  • Degree of gloss: glossy
  • Resistance to: alcohol

Tampaplus TPL

Very fast drying and resistant pad printing ink especially for processing in closed cup systems. Versatile and easy to use. To further improve surface stability and other characteristics, hardener can be added. Tampaplus TPL is very universal, particularly on ABS, polystyrene, rigid PVC, acrylic glass, polycarbonate, polyester, thermosetting plastics and varnished surfaces. Thanks to its high resistance and particularly good printability, Tampaplus TPL is ideally suited for use in industrial pad printing, e.g. on operating elements, housings of all kinds etc., but also for the field of toys and promotional items.

Additional Information:

  • glossy
  • very fast 1 or 2-component ink
  • resistant to alcohol and petrol
  • very good printability
  • universal use

Technical Data:

  • Composition: 1-component or 2-component
  • Drying: very fast
  • Degree of gloss: glossy
  • Resistance to: petrol, alcohol

Tampastar TPR

This glossy pad printing ink is distinguished by particularly high resistance. Being a one-component ink, it is very quick-drying and easy to process. To raise surface stability or other stabilities, hardener can be added. This pad printing ink can be widely used. On rigid PVC, polystyrene, ABS, acrylic glass, polyester, thermosetting plastics and varnished surfaces. Because of its high resistance, it can also be employed for products subject to high mechanical stress, the effects of hand perspiration or cleaning agents, such as control knobs, camera housings etc. Under certain circumstances, this ink also is suitable for polyacetal materials.

Additional Information:

  • glossy
  • very fast 1 or 2-component ink
  • resistant to alcohol and petrol
  • universal use

Technical Data:

  • Composition: 1-component or 2-component
  • Drying: very fast
  • Degree of gloss: glossy
  • Resistance to: petrol, alcohol

Tampatech TPT

High-gloss, quick-curing two-component ink, very universal use, with a long pot life. For high-demand adhesion, scratch resistance and chemical resistance in technical and decorative applications. ABS, pre-treated polyethylene and polypropylene, polyamide, thermosetting plastics, metals including thinly anodised aluminium, but also varnished surfaces and powder-coated surfaces. Under certain circumstances also suitable for polyacetal materials, such as Hostaform C or Delrin.

Additional Information:

  • high gloss
  • fast curing 2-component ink
  • resistant to chemicals
  • universal use
  • long pot life

Technical Data:

  • Composition: 2-component
  • Drying: fast
  • Degree of gloss: high gloss
  • Resistance to: chemicals, alcohol, petrol, grease, oil

Tampapur TPU

High-gloss, quick-curing two-component ink for high-demand adhesion, scratch resistance, mechanical and chemical resistance. By using a matting paste, the degree of gloss can be varied. Materials that are difficult to print on, such as pre-treated polyethylene and polypropylene, thermosetting plastics, metals and varnished surfaces, but also polyurethane, polyamide, melamine resins, powder-coated surfaces and suchlike. Can also be used for polyacetal under certain circumstances.

Additional Information:

  • high gloss
  • fast curing 2-component ink
  • high chemical and mechanical resistance
  • universal use

Technical Data:

  • Ink system: 2-component
  • Drying: fast
  • Degree of gloss: high gloss
  • Resistance to: chemicals, alcohol, petrol, grease, oil

Tampapol TPY

Glossy, quick-drying pad printing ink with good resistance to many chemicals such as oils, greases, alcohol. Hardener can be added to further raise surface stability and other properties. Tampapol TPY is primarily used for printing on packaging made of pre-treated polyethylene and polypropylene, ABS as well as rigid PVC. Also widely used for thermosetting plastics, metals and varnished surfaces.

Additional Information:

  • glossy
  • fast 1 or 2-component ink
  • chemical resistant
  • good opacity

Technical Data:

  • Ink system: 1-component or 2-component
  • Drying: fast
  • Degree of gloss: glossy
  • Resistance to: chemicals

Tampacure TPC (UV drying)

This UV-curable pad printing ink is particularly suited for printing and decorating such products which are immediately to be post-processed and are requiring excellent mechanical and chemical resistances. Tampacure TPC is mainly used on ABS, rigid PVC, some polycarbonate (PC) but also on polystyrene (PS), and acrylic materials (PMMA). By adding Hardener H 2, a good adhesion can also be achieved on many other substrates such as pre-treated polyethylene (PE) and polypropylene (PP), as well as polyamide (PA), and varnished surfaces. Tampacure TPC is high-glossy and has a high opacity.

Additional Information:

  • UV-curing
  • high-glossy
  • to be used as a 1- or 2-component ink
  • high chem. and mech. resistances

Technical Data:

  • Composition: 1-component or 2-component
  • Drying: UV-Hardened
  • Degree of gloss: high gloss
  • Resistance to: chemicals, alcohol, petrol, grease, oil

AT-H200C Product Info

  • Specs
  • Gallery

Applications

  •    It is suitable for wine caps stamping on side and top. Reliability and speed make the H200C ideal for off-line or in-line 24/7 production..

General Description

  •    Automatic loading system with hopper and bowl feeder (not suitable for glossy caps).

  •    Automatic transfer with indexer.

  •    Stamping on side or top of the caps optional.

  •    Auto foil feeding and winding.

  •    Auto foil feeding and winding with adjustable function.

  •    Height of stamping head adjustable. Stamping pressure adjustable.

  •    Well built machine house with CE demand for safety production.

  •    Reliable PLC control with touch screen display.

Tech-data

  •    Max stamping area: 200×150mm

  •    Stamping Head Stroke: 50mm

  •    Max. article Height: 75mm

  •    Temperature: Room Temperature~280

  •    Stamping Pressure: ≤500kgf

  •    Max. Stamping Speed: 2400pcs/hr

  •    Air Pressure: 4~7bar

  •    Air Consumption: ≤80L/min

  •    Power Supply: 220V 60Hz/50Hz

  •    Heating Power: 1000W

  •    Weight: 500kg
Read More

Welcome to the AT-H200C Gallery. Click any image for a closer look...

Read More

eNewsletter Registration

* indicates required